Ives Door 7212 12V User Manual

Installation Instructions  
7212/12V and 7222  
3/4” Offset Intermediate Pivot  
Door  
leaf  
Bearing  
spindle  
Right hand  
installation shown;  
left hand opposite  
Frame  
leaf  
3/32” Allen  
wrench  
Left hand  
installation  
Right hand  
installation  
3/32” set screw  
5/32” Allen  
wrench  
1. Prepare and mortise hinge stile of door and hinge side jamb to receive pivot set. Determine  
pivot location using dimensions on reverse side. The pivots are handed and must match hand  
of door. To determine hand of door and proper pivot position, see diagrams above. Install top  
and bottom pivot sets before installing intermediate pivot.  
2. Locate, drill, and tap 1/4-20 mounting holes for metal door. Locate and drill pilot holes for  
#14 wood screws for wood door. Then hang door.  
3. Open door about 90°. Install pivot leafs with 1/4-20 x 3/4” FHMS or #14 FHWS screws provided.  
4. The door weight should be balanced between bottom and intermediate pivots. To adjust  
intermediate pivot (refer to diagram above):  
A. Loosen set screw in jamb leaf with 3/32” Allen wrench.  
B. Insert 5/32” Allen wrench through jamb leaf pivot and into underside of bearing spindle.  
C. Turn clockwise until door weight is balanced evenly with bottom pivot.  
D. Tighten 3/32” set screw securely.  
CAUTION  
!
Improper pivot set installation can lead to personal injury or property damage. Follow  
all instructions carefully. For questions contact Technical Support at 1-888-371-7331.  
13103 Rev. 4  
© 2006 Ingersoll-Rand Company Limited  
 

Intel Network Cables 440GX User Manual
JVC VCR HR A591U User Manual
Jwin MP3 Player JX MP101 User Manual
KitchenAid Coffeemaker 4KPCM050PM0 User Manual
KitchenAid Cooktop KECC507RBL03 User Manual
KitchenAid Range 9752043 User Manual
KitchenAid Refrigerator KBFS25EVMS3 User Manual
Kompernass Rice Cooker SRK 700 A16 User Manual
Konica Minolta All in One Printer C203 User Manual
Korg DJ Equipment PX3B User Manual